Bandsaw Machine Double Column Automatic Horizontal Model BANKA 350MM

5,45,000

  • BANDSAW MACHINE DOUBLE COLUMN
  • CUTTING CAPACITY ROUND: 350 MM
  • CUTTING CAPACITY SQUARE: 350MM
  • MAIN MOTOR: 3HP-1440 RPM
  • HYDRAULIC MOTOR: 1HP
  • BLADE: HSS BIMETAL 4500MM
  • COOLANT TANK: 100 LTR
  • COLOUR: LIGHT GREEN & CARBON BLACK –  RED & CARBON BLACK
  • DELIVERY: FREE
  • WARRANTY : 3 YEARS
  • TRANSPORTATION: 100% RESPONSIBILITY FROM OUR SIDE
Enquiry
Fully heavy duty welded structure torsion free construction.
Cutting head up-down movement guided in Vertical pair of “HIWIN” Germeny linear Motion bearing
for jerk free movement.
Infinitely variable pressure controlled cutting feed & upward return rapid movement by hydraulic
cylinder.
Quick approach of cutting head upto the bar before cutting starts to enhance productivity by
pushing rapid Button.
Coolant tank with 100 Ltr. capacity and powered with electric coolant pump.
Adjustable titanium carbide face blade guides with ball bearings at both side of cutting bar
Hydraulically operated main vice with double acting full stroke cylinder
Automatic return of cutting head much above the bar after cutting to safe height to save blade
damage by bar while indexing.
Hydraulically controlled automatic feed regulation through a state of the pilot operated hydraulic
valve to Optimize production and tool life.
High pressure coolant jets through blade guide helps coolant to enter in to the bar through blade
gullets to optimize productivity and tool life.
Manual blade guide setting with the opening and closing of moving vice
Cutting feed through infinitiely variable flow control valve with cutting pressure regulation, as per the
material property.
Heavy duty/Warm reduction gear box for blade rotation to minimize polygon effect to enhance tool
life, surface finish and minimize vibration during cutting.
Heavy duty energy efficient electric motor directly coupled to the gear box to minimize belt slippage
losses.
Control panel with necessary switch gear and step down transformer for control circuit
Split vice: – Machine is designed to offer burr free cutting with the help of split vice were in raw
material bar and Cut piece are clamped rigidly till the cutting head goes up after cutting which also
avoid rubbing of blade.
Stretching of blade through a Hydraulic operated or manual operated blade tension arrangement.
Linear motion guide rail & bearings on vertical columns are lubricated through oil pump.
Hydraulic power pack with sufficient oil tank capacity and necessary control elements is provided on
the machine.
Cutting feed and rapid reverse of cutting arm.
Cutting Capacity – Round 350 mm dia., Square 350 x 350 mm
Blade Speed: 10 To 60 Mtr/Min in std
Main Motor : 3HP
Hydraulic Motor : 1HP
Coolant Motor : 0.15 HP
Supply : 415 V,50 Hz,3 Phase A.C. Supply Control circuit with 220V
Blade : HSS Bimetal 4500
Floor Space:- 3000mm x 800mm
Coolant tank – 100 Ltr
A.C. frequency control drive for infinite variation of band speed thru control panel.
Feed control valve.
Hydraulic or manual blade tensioning attachment.
Hydraulic main vice.
Hand Lubrication Pump.
Slide movement of cutting arm on linear motion guide with bearing.
Electrical control Panel with push button, emergency stops button, main isolator, Auxiliary contractor, and cable